What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 20.06.2025 06:20

“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
It also is a device that limits the change in current flow.
Now when you have a certain ac resistance, then a current flows in a loop.
First Sentence:
This device then solves the entire problem.
What do you do when you are struggling to fall asleep?
An AC voltage/ current source, and an ac inductive load.
eight
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Cher’s Son Elijah Blue Allman Hospitalized After ‘Acting Erratically’ - Rolling Stone
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Here is a simplified AC power diagram.
[old diagram got deleted by accident]
How do women feel when they are in love?
but this device (an Inductor) … impedes the rapid changes in the current.
nine
But it can get overloaded, and no longer works.
Why are American university students fine with sharing a room?
These are simplified answers to the original question, and does not change anything I wrote above.
Barnstars:
The MOV will conduct when the voltage exceeds 50% of line voltage.
Why do I sweat so much after shower?
For this case there are devices called Metal oxide varistors (MOV).
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
What species of fish are horse mackerels?
The third is lightning and “how it gets conducted into a home.”
There are two important concepts here.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
2024–10–16 [ OO OLAOYE OYEBODE ]
This is 'the assistant's answer'
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Which feels physically better for guys: vaginal sex or anal sex?
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
I post the exact comment here.
This is where this question deviates from being a 'generic' question, and becomes more specific.
Can you make a fake K-pop group? It can be with any idols.
2024–10–10[John johnson John Johnson ]
This one hit behind the barn.
Because the load is inductive, the current lags the voltage.(by a bit).
Why do I feel worthless most of the time?
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
Upvotes:
The bolt then partially travels down the line to your home.
This is where the MOV conducts again, and dissipated the energy.
It seems Mohan does not understand the difference between a comment and an Answer.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
One
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
The other is “what does a “fuse” do?”
but I think this circuit , shows a few more pieces.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
In schematic diagrams this is the symbol for a fuse:
These devices are installed between the “hot” and “neutral” and protective ground.
At one ohm, the resistor has a maximum of 1 watt power.
What does a fuse do?
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
2024–10–14 [Omar Gharbi Omar Gharbi ]
a photo is worth a thousand words.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
the problem then depends on "how fast does the fuse operate?".
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
[image of Common-mode choke]
At least they know the answer if they wanted it.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
He then describes the function of a fuse.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
So, the voltage could go up to 500 volts, and the fuse will not open up.
A circuit breaker is similar, but is resettable.
so, what happens?
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Edit 2024–10.
But… the neutral is now “floating” because of the 1 ohm resistance.
A fuse is a non-resetable over current circuit protector.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
He then asserts :
(Dc diagram shown, AC is similar).
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
What is lightning?
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
He then describes Rainy Season and Lightning.
what exactly is a ‘surge’ protector?
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
One is “what exactly is in a ‘surge protector’ ? ”
There are three different concepts here that are getting confused.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”